8n plow compatibilty with ford 600

Dan Daggett · Mar 4, 2011

i was wondering if the snow blade off a 8n would be compatible to mount on a ford 600.

Dean · Mar 4, 2011

Probably adaptable but may require modified bracketry, depending upon design.

Dean

Ken-Pa · Mar 4, 2011

Mounting would be a little different depending on what plow you have . Posting pics of the plow with a question like this would help us a lot . The 600 has mounting holes under & on the sides of the belly , not like an on .The 8n utilizes the front axle holes & fender bolts as mounting points . But with a torch & welder , a guy can make anything adaptable .But I hth ! God bless

Leroy · Mar 5, 2011

Are you talking about a blade that fastenes to the rear and front axles with a cable lift to the rear? Never heard of a 8N with midpoint mountings. The 600 is the same as a NAA and would have the midpoint attaching bolts underneeth but they have a longer wheelbase than the 8N. The cable lift front blade will work on a NAA but you need to adjust the cable length but with that extra length you need to modify the front axle mounting plates as the frame gets narrower where they set and the frame does not have the rub rail going that far forward. Had one on the NAA for a couple of years before we put it back on the 2N, same size as the 8N, also used on the Ferguson, same exact fit as the 8N. On the shorter Fords and Ferguson the blade would angle to the side to max angle while on the longer NAA the angle would only go to the mid angle as at full angle it was hitting the front tires.

8n plow compatibilty with ford 600

Dan Daggett

New User

Dean

Well-known Member

Ken-Pa

Member

Leroy

Well-known Member

Similar threads