Northern MN Auction

Inno · Aug 28, 2010

Went for a look around this [/url]http://www.nsauction.com/auctions/08_2010/0828_johnson.html auction this morning. It was a hoa....com/gallery/tphotos/a133759.jpg[/img] [/img]

Bill in Colo · Aug 28, 2010

Loader is a Farmhand F10,most every ranch in the intermountain west and where ever loose hay was put up had one or more. Used to stack and feed. I still have one mounted on a 47 M Farmall.

Chad Franke · Aug 28, 2010

I"ll add it"s an early F10, can tell by the crossed braces in the back, newer ones went to a single channel on the corner. We have one on an MD with liver power and power steering, and one on an M with the engine locked up.

One has the snow bucket on it, which I would really like to find one near NE Colorado...

Inno · Aug 28, 2010

Thanks for that guys, I knew it must be a mass produced one when I saw more than one tractor equipped with it. I also figured it wasn't for lifting anything too heavy. Sure adds some bulk to the tractor to which it's attached.

redtom · Aug 28, 2010

That little tractor looks a lot like a Silver King I have only with the sheet metal from a Continental stationary engine or something.

molinebob · Aug 28, 2010

Where was this auction at in northern minnesota?

Fordfarmer · Aug 29, 2010

That curved crease down the side of the hood says "Farmall"... but nothing else about it does.

Chad Franke · Aug 29, 2010

Yeah, I think they were "only" rated for 2500 pounds at something like 21 feet up... Most of them had bucks that were 8-10 feet wide with 8 foot tines. We loaded and unloaded thousands of big round bales with our two. They are way stouter than they look.

On Farmalls they push the front end away from the back with the front brace, an extra brace tieing the front tractor frame to the rear loader frame is strongly advised, they will break the belly housing eventually, BTDT.

Vito · Aug 29, 2010

Could be a Hebard shop mule.

Vito

bill mart · Aug 29, 2010

from the sale bill,is this it?
Fate Root Heath w/ “Silver King” rear end, Continental engine, #808, Pat#D91855

Inno · Aug 29, 2010

Gee, I never thought to look at the sale bill. The sale was a few miles west of International Falls MN.

LenND · Aug 29, 2010

I bought a H IHC last summer wiyh a Farmhand 10 loader on it. All painted IH red and worked like a charm. I took it off cause it was too bulky to work my trees with it on. It is also for sale.

Pogo · Aug 30, 2010

That could be an IH baler motor mounted on a Case frame.

Northern MN Auction

Inno

Well-known Member

Bill in Colo

Member

Chad Franke

Member

Inno

Well-known Member

redtom

Well-known Member

molinebob

Member

Fordfarmer

Well-known Member

Chad Franke

Member

Vito

Well-known Member

bill mart

Well-known Member

Inno

Well-known Member

LenND

Well-known Member

Pogo

New User

Similar threads