(800) 853-2651
SHOP NOW

JD Offset disc ID?

B

blunosr

Member
Hi, A friend of mine gave me his old 12' John Deere disc. I'd like to get a manual or parts list for it so I can fix it up, but I can't find this model number anywhere. Does anyone recognize it? It's got 18" discs and is about 12' wide.

DSC_2109.jpg


DSC_2111.jpg


I'd like to see how the disc gangs come apart so I can replace the bearings.

Thanks for any advice,

Troy Boyd
 
Have you called DEERE Techpubs @ 1-800-522-7448?

One would HOPE they could identify it!
 
you take the 1/2 inch carriage bolts out of the bearing holders then drop the gang out. remove the nut from the end of the shaft and take it apart
 
Troy, the disk itself and the tag both confirm it but you have a model 100 disk. It was introduces as part of the "Level Action" family in 1974. It should be very easy to get parts for. All gang parts should be the same as a 110 or 111 disk. Mike
 
looks like the "Helpful" responders identified it for him! dont always have to call a 1-800-whatever number. bill m.
 
Thanks for the replies, I did find it. It's called a 100 Integral Disk. I got the Parts images and list so I should be good to go.

Thanks again!

Troy Boyd
 
Yep, I guess calling a toll-free number would be quite an expense AND an inconvenience!
 
why spend the money on a manual if all you need is a model identifacation? john deere web site will give you the parts manual download for free.I personally would order a operators manual for all of the service specs but thats me.Bill M.
 
I DID NOT tell him to spend money. I suggested he make a FREE phone call to find out what he had and what manuals he needed.

OBVIOUSLY, he could then view the parts catalog for FREE at jdparts.com, and decide whether or not to spend the money for an operator's manual.
 
you mean you can call 1-800-522-7448 and they will identify you piece of equipment? I did not know that! looks like he went to the manual section of JD.Com and got the info he needed. bill m.
 
You must log in or register to reply here.

Similar threads

B
IH Fast Hitch Plow and Disc ID
Replies
7
Views
850
Kevin Happke
K
M
K160 update
Replies
14
Views
1K
casecollectorsc
casecollectorsc
M
New-to-me JD-A and JD-B Repair Tips
Replies
13
Views
847
Fixingfarmer
Fixingfarmer
D
You have a new JD convert. I'm gonna need some on-going advice
2 3
Replies
41
Views
2K
Poppy Johnny
Poppy Johnny
8
PLEASE HELP 49 8N Ford
Replies
18
Views
1K
Jerry9N
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top