(800) 853-2651
SHOP NOW

Hydraulics bind up?

H

hayray

Well-known Member
I have been having this problem with my White 2-105 while operating the gate on my NH BR 730 baler. Hook up the machine, door opens and closes no prob., get to the field make the first bale and go to eject and then the door opens part way and stops. One hydraulic hose will not release pressure, I have to undue the male end to release pressure. I then switch to the other set of remotes and then bale for a while and the same thing happens with the same hose coming from the baler, so I switch back to the other remotes. Is this a baler or tractor issue?
 
Check the quick connects on the hoses from the baler,sounds like one is getting worn out and intermittantly not flowing oil.
 
I have a similar issue with my baler. One hose to the cylinder that moves the thrower side to side leaks a little and once in a while the cyl wont move one way. If I idle the tractor down and move it back and forth it starts to work again. Wierd. I suspect the leak is causing the problem because other implements do not do this.

I intend to fix the leaky hose one of these days to see if the issue goes away.
Do you have any leaks?
 
I'd be looking at the baler. That 2-105 has open center hydraulics,so should be getting good pressure out there.
My John Deere hydra push spreader is the only thing I have around here that does that. Frustrating as all get out. Like you said,intermittent. Only does it if I bring the floor all the way ahead. If I leave it back just a little it's alright. Like you said,it will stiffen one hose up and I have to wedge a cresent wrench between the tip and coupler to get it out,then bang the tip on the drawbar to get the pressure to release. It doesn't do it on my 1850 with closed center hydraulics so much as it does the 2-135 though. I know it has to be in the spreader though,that's the only implement that does it.
 
You must log in or register to reply here.

Similar threads

R
435 John Deere Round Baler- Twine tie goes out when tailgate opens
Replies
2
Views
168
Jim.ME
J
M
JD 467 baler monitor question
Replies
3
Views
330
Mshudgins
M
G
Ford 5610 4WD problem
Replies
1
Views
187
wore out
wore out
grandpa Love
Cub Lo-boy 154
Replies
14
Views
684
grandpa Love
grandpa Love
WI Dan
hydraulics hose coupling issue - pressure on ball
2
Replies
33
Views
2K
fdt860
F
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top