8n Ford Funk

Les Ramsey

New User
How do I remove the valves from the block on a 226 ci flathead inline six engine? I have removed the head and the side valve covers. I then compressed the valve springs. But how do I remove the keeper halves so that I can remove the valves from the block? Is there some special tool?
 
If your fingers are to big use a magnet. You do have a valve spring compressor. and the valve is in the closed position. Sometimes the keepers are just stuck a little (been together for 50 yrs) you mite not have the springs compressed. Use a bar and a hammer on them.
 
If your fingers are to big use a magnet. You do have a valve spring compressor. and the valve is in the closed position. Sometimes the keepers are just stuck a little (been together for 50 yrs) you mite not have the springs compressed. Use a bar and a hammer on them.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top