Anonymous-0
Well-known Member
I got the head retorqued on my MF, and got it running again. Removed the bed spring wrapped around the balde drum on my flail mower. Will be back in business tomorow. stan
- Thread starter Anonymous-0
- Start date
Nancy Howell
Well-known Member
Bed spring? Its amazing the things that turn up when using a mower.
Goose
Well-known Member
Couple of years ago, I was using a "whirlwind" terracer to reshape a waterway. It caught on something metal.
I hooked onto the "something" with a tractor and chain. It turned out to be the springs from a daybed we had when I was a little kid. How they got into a waterway a half mile from the house is beyond me.
I hooked onto the "something" with a tractor and chain. It turned out to be the springs from a daybed we had when I was a little kid. How they got into a waterway a half mile from the house is beyond me.
J.Wondergem
Well-known Member
- Location
- Rockford, Mi.
Glad to hear you got it going again. Now tell us if you did, or didn't get a quarter to a half of turn more on those head bolts when you returqued the heads.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy