48 8n is my new workhorse

Anonymous-0

Well-known Member
I am the proud owner of a very used 8n. I looked 2 years for one that i could afford but the one i ended up with has its share of problems. It wasnt running when i bought it but after cleaning out the tank and carb finally got it to fire and run. It has a problem running smoothly when u idle it up just a little. It spits and spudders,pops and smokes a bit. I checked the cylinder pressure and its lowest reading on all cylinders was 89#s. I know thats not good so i pulled the head but the gasket was fine and no cracks in the cylinders or sleaves. replaced the gasket and have been running it for the last year that way. I think the rings are probably shot, but im no mechanic.
 
Put a 1/4 cup of ATF in each cylinder and let it sit a week and see if that helps. Atf will loosen up stuck rings and help clean out carbon either of which can cause problems
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top