help

maxwell williams · Apr 6, 2010

looking for a temp guage for and old h farmall and how do you check hydrlic oil and how do you check oil with out a dip stick

JayinNY · Apr 6, 2010

Open the tee handel on the oil pan, if no oil comes oun open the one below it, if oil comes out add some until it just starts to drip out of the top one. Oil pan holds about 6 quarts

maxwell williams · Apr 6, 2010

thanks

mkirsch · Apr 6, 2010

Temperature gauges are as common as zits on a 16-year-old's face. Any 2" temperature gauge from the auto parts store will do. There are dozens of online places where you can purchase a "genuine" reproduction IH temperature gauge, including this site.

Get an owner's manual for your tractor, also available from this site.

The engine oil level is checked using the two petcocks on the side of the oil pan. If no oil comes out the lower petcock, add oil through the big cap on the right front of the engine until it runs out the top petcock.

The hydraulic oil is checked using the dipstick in the pipe on the right side under the gas tank. If there is no dipstick then fill it until you can see oil in the pipe.

Leyland-270 · Apr 6, 2010

I have a couple of Hyd. dipsticks if you need one.

[email protected]

help

maxwell williams

Member

JayinNY

Well-known Member

maxwell williams

Member

mkirsch

Well-known Member

Leyland-270

Member

Similar threads