NH Skid Steer Aux. Hydraulics

Tweeter · Apr 4, 2010

I never used the aux hydraulics on my skid steer and now am building a snow plow and grapple for the machine. What is the rocker switch with the "2" on it (middle vertical switch) used for and when do I use the handle pushed to the left? My thinking is that the handle pushed to the left will give me a constant flow of fluid for augers, mowers, etc., where the rocker switch "2" will activate a grapple (open/close) or snow plow (left/right). Am I correct?

RodinNS · Apr 4, 2010

If the machine has 2 pairs of boom couplers then I would assume that the rocker switch is there to activate an electronic selector valve to switch between one pair or the other...

Rod

Tweeter · Apr 4, 2010

No the boom only has one set of aux. hydraulics.

Tweeter · Apr 4, 2010

If that was the case, how would you open/close or and a grapple or snow plow?

Anonymous-0 · Apr 4, 2010

Why not look in your owners manual???

nhboyd · Apr 4, 2010

Flip the switch and tip the handle to the right or left

Tweeter · Apr 4, 2010

Did that. What does your manual say?

NH Skid Steer Aux. Hydraulics

Tweeter

Member

RodinNS

Well-known Member

Tweeter

Member

Tweeter

Member

Anonymous-0

Well-known Member

nhboyd

Member

Tweeter

Member

Similar threads