transmission on belarus 250as

Anonymous-0 · Mar 13, 2010

My tractor slips out of low range, any suggstions on what I can do?

nhboyd · Mar 13, 2010

If there is any linkage adjustment make sure it is moveing all the way. You may have a worn fork, or other parts inside.

mmidlam · Mar 13, 2010

might get more help at this link
belarus group

Anonymous-0 · Mar 13, 2010

There is a transmission interlock on these.When the clutch fully released there is a shaft that slides thru the trans shift rails on the side of the trans top that lock the gears in place.It's been a while but on a 250 I believe its on the drivers side up under the floorboard where the trans top meets the case.You will see a linkage arm that runs to the clutch linkage.One indicator that this is out of adjustment is the clutch pedal usually doesn't come all the way up.

Anonymous-0 · Mar 25, 2010

hi
I need to know the oil used in belarus MT3-50
for transmition, motor and hidraulic system.

thanks you

leogar

transmission on belarus 250as

Anonymous-0

Well-known Member

nhboyd

Member

mmidlam

Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Similar threads