1949 CASE DC Oil Specs

Ben Holland · Mar 7, 2010

Does anyone know the oil specs on 1949 Case DC and about how much is needed? Engine, Transmission, Rear End, Hydraulics and anything else you could think of. Thanks

olgentdc · Mar 7, 2010

engine 2 gallon 40 wt. ,Hot & Hard summer work 50 wt.. Also drain wet hand clutch housing ...Tranny reqires around 12 gallon 90 weight , fill to 1/4 pipe plug found on tranny ,,hydro 10 or 30 weight , 10 quarts

Tom Railsback · Mar 7, 2010

Capacities:
Crankcase--1.75 gallons (7 quarts)
Transmission--10.5 gallons (42 quarts
Cooling System--6.75 gallons (27 quarts)
Hydraulics--9 to 11 quarts depending on cylinder
used
Oil types:
Crankcase--90 degrees and above--SAE 30
32 to 90 degrees--SAE 20
10 to 32 degrees--SAE 10
below 10 degrees--SAE 10W
Transmission--Below 32--SAE 90, above 32--SAE
140
Hydraulics--same as engine

These specifications are taken from an original dealer's service manual.

1949 CASE DC Oil Specs

Ben Holland

New User

olgentdc

Well-known Member

Tom Railsback

Member

Similar threads