farmall M

Biran Berggren · Oct 4, 2009

I have a farmall m. i have an end loader i want to put on it and my question is will a bahlen distibuter pump run it or will it be to hard on the distributer

rustyfarmall · Oct 4, 2009

The Behlen pump is for power steering only. It does not have the capacity needed for a loader.

Wilson · Oct 4, 2009

there are many pumps dist drive which will work

Janicholson · Oct 4, 2009

I agree with Rusty. Put a PTO pump, or the belly pump. If you need a live pump, then there are many ways. A front cover and gear train from a 51 and a half or newer M, SM, SMTA, or 400/450.
These will have the right bolt spacing for a Live pump in front of the distributor. Put a belt drive pump on the front pulley with an adapted pulley drive, or build a U joint operated system to come out the hand crank shaft with rotational power. All take come engineering except the non live options. JimN

farmall M

Biran Berggren

New User

rustyfarmall

Well-known Member

Wilson

Well-known Member

Janicholson

Well-known Member

Similar threads