(800) 853-2651
SHOP NOW

Woods belly mower blades

A

Anonymous-0

Well-known Member
I recently picked up a Farmall A with a 5' Woods belly mower. I cracked it out & mowed tonight. Each pass I made I noticed that the center blade wasn't cutting real well, leaving the grass partially uncut. All three blades are pretty well worn, so I was just wondering if anybody knew where I could pick up reasonably priced new ones? They are 20" wide. Thanks
 
Might just as well go to a Wood's dealer. I matched up a set of blades at tractor supply for my John Deere 316 !/2 the price and 1/4 the life. Put a set of new JD blades on and they cut good all last summer and only needed minor touching up this years so far. The Wood's blades on my RM-59 are still in good shape from last August and have cut 5 acres at least a dozen times. The cheap TSC blades were hacking on the 2nd time I mower with them. Stick with OEM blades.
 
I just bought a set for a woods 6' belly mower from Baileys online. They're a good source for chainsaw stuff also. I think my blades were about $45 for the set. Woods makes good stuff but some items are a bit pricey. I've had a little allis for quite a few years. The first belt I broke was almost $200. I shifted the location of an idler pulley to accept a standard belt which costs about $50.
 
Any implement dealer can get them for you.

When you take them off to resharpen them always rotate your blades.

What I mean by this is to move the left one to the right side, the right one to the middle and the middle one to the left side. This way they get even wear over time. Sometimes the center one will bottom out more often than the outer ones.
 
You must log in or register to reply here.

Similar threads

A
Woods 1260 rotary mower (10 foot) blades getting out of time and hitting each other
Replies
8
Views
474
andy r
A
Charles in Aus.
Ride on mower blades
Replies
15
Views
684
dhermesc
D
C
Woods 6' rotary mower blades
Replies
7
Views
524
MARK ROBKE
M
Stroby
Woods RM59 finish mower
Replies
6
Views
695
Geo-TH,In
Geo-TH,In
R
Ford 501 Sickle Bar Mower
Replies
4
Views
557
paul
P
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top