(800) 853-2651
SHOP NOW

super m keeps breaking starters

G

Grandpa Ed

New User
HELP i have a super m and i have had to have the starters rebuilt 5 times to date. I put the new starter on and it starts right up, but after a few starts it will spring the spring inside..(twist it) I am ready to give up on this one..

any help would be appreciated.
 
Are they useing the right bendix? I have seen some bendix with straight teeth, and some with slanted teeth. I am not familar with the super M setup , I am just throwing ideas to see if it will help... Larry
 
does your starter have the correct spring? some starter springs are wound the oposite way. they look ok but are wrong.you could be putting on the wrong one. been there and done that.
 
there is a new style bendix available, case i-h should have em, if not you can get them from steiners, part number ihs132 for 39.49. external_link. one other thing, pull the starter and check the ring gear on the flywheel, see if the teeth are good.
 
I'm with Roy, It would be very easy to get the wrong spring. Recently I was at a local rebuilder and a farmer brought a M starter in that wouldn't engage. After exploration, another rebuilder had put the wrong fields/ armature in it and it was running backwards! mEl
 
You must log in or register to reply here.

Similar threads

H
gear reduction starters ??
Replies
12
Views
639
buickanddeere
B
M
Meyer E47 snowplow sporadically jams on rising
2
Replies
21
Views
945
mikepastor11
M
F
Stalling Farmall Super C
2
Replies
22
Views
680
farmallphred
F
M
Farmall super M dies after 20 minutes
Replies
13
Views
390
Chester5731
C
W
BD144
Replies
11
Views
341
wildbill447
W
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top