Wheel Horse Raider 12

Jim Mixa · Aug 27, 2008

I have a wheel horse raider 12 with a kohler engine that is blown. I was looking for a crankshaft and a connecting rod for this engine.
My question is this did wheelhorse have a different crank, than let say a cub cadet with a 12 hp kohler? Someone told me that the pto end was larger on the wheel horse (1" vs 1 1/8"). Is this true or can a crank fron other 12hp kohlers work?

Anonymous-0 · Aug 27, 2008

Check engine numbers and measure crank- Kohler , and others, made engines with different cranks with same hp/general model names. JD and Cub Cadet differ in cranks for same hp rated Kohlers- Wheel Horse difference would not be a surprise. RN

onefarmer · Aug 27, 2008

The Cub Cadet seems to be most common with the inch shaft. But Kohler's did come with a lot of different cranks a designated by the specs of the individual engine. The crank for my Ford LGT12 has the 1 1/8" crank

Irv (Ia) · Aug 27, 2008

Most likely an 1 1/8". I was thinking that the Raider 12 came with a cast iron Tecumseh, HH120.

Irv*

Traditional Farmer · Aug 27, 2008

I have a good running engine from a Raider 12 I'll sell for $250 or the whole tractor for $350

gab · Aug 27, 2008

I can'nt remember the diameter of the crank, but if you're junk yard shopping I think the length of the pto end is different between different applications. Also the rod oil dipper is longer on a wheel horse two guart oil pan than some of the short pans.

Wheel Horse Raider 12

Jim Mixa

New User

Anonymous-0

Well-known Member

onefarmer

Well-known Member

Irv (Ia)

Member

Traditional Farmer

Well-known Member

gab

Well-known Member

Similar threads