861 POWER STEERING

Might be possible to get individual parts from NH ?? I have the shop manual supplement for power steering on 600-800 tractors, not sure if they changed the power steering design or components, most likely not though, maybe the pump, think there were 2 different reservoirs or something, but if the same control valve, it says what to inspect how to take things apart in steps, what not to lose, (like the steel balls), maybe yours is salvageable after taking it apart, or might have to see if a salvage yard, or some source has a spare, that works or is servicable, always wondered how the outfit, N Complete or other similar restorers deal with the power steering units on these, NC were doing complete remanufacture/full mechanical restoration of 600-800's and same for sale as such, must have the same kind of problems, my 850 has an in operative PS system, ought to be a job to get PS back on line again on this one between finding or rehabbing parts.
 
yeah, that might be the case, out of tolerance, kind of a rock and a hard place, ask over on the ford board, ask about salvage yards too, interesting dilemma, PS on these old fords and a few other components are becoming harder to find parts for, kind of a shame, for what they are, still a great tractor, love those old hundred series for some reason.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top