(800) 853-2651
SHOP NOW

Need A Little Help

D

Dick L

Well-known Member
Need a little help getting parts to Lanse for his B project. Need to keep him busy and out of trouble. :)^D

125Head005-vi.jpg


We need to get the block, head, and rocker arms from Edon, Ohio south to Brookville, Ohio.

Edon is just south of the Ohio Turnpike on 49. I can watch people pay there toll from my office. It is going to be some time before I can get it to him myself.

Brookville is just north west of Dayton, close to I 70.
 
buy another tractor and try to do the same. If it dont work, i'll just have to get another to try again :)
 
Should have said last exit before Indiana. Or the exit in between the Indiana and Ohio toll gates. (We call it mid toll) Edon is five miles south of that and two miles east of the Indiana state line. My farm and factory borders the Ohio Turn Pike at the three mile stick. I live 3 miles south of Edon on 49.
 
Maybe Lanse should wait until you can bring it? He should at least have a really good mechanic install that work of art. Would hate it if something went wrong because it wasn't installed properly. Lanse could watch/help and pay real close attention to how it's done. Would be a good way for him to learn the proper way of doing things. Dave
 
DickL I plan on going to Bloomington IN from Cleveland next weekend with truck and trailer.Looking at mapquest it is about 1/2 hour greater distance going west 80 then south 69 on my way there than it would be going east 70 then north 71 back.Seeing as you have alot more time into the job it wouldn't be much trouble taking the long way.
Plenty of room, going down empty and coming back with only a Massey135 and an implement or 2
 
I Had planned to do that but things are not working out here in the short run.

I would like him to get a sleeve and piston kit. I am betting that when he sticks the new rings down in the sleeves that you will be able to stick part of a hot dog between the ends of the rings. With the crank shot and way under size and the pistons being stuck in. It would be a real stroke of luck if you could make a new set of rings work correctly in the old sleeves.
 
That would be great.
We should be able to work it out and I could meet you at the exit to save you a few miles. Burger King and Subway just north of the exit within sight. Flying J has a big tuck lot back of them. When the State gets there crap together so the water tower can go up Flying J will start building. Or so the story goes.
 
My first that came to my mind when I viewed the (BLUE and RED) was is this paint that will dissolve and cause lube problem. Please explain. Maybe just for show. CENTAUR
 
Probably can't help much this time, but I have a son in Wilder, KY and live south of Coldwater, MI. I go that way several times a year, but not now until fall. Lety me know if something else comes up.
P.S. I grew up on an Allis B--great little gutty tractor.
Paul
 
Anyone have a Lexan valve cover for that so we can keep an eye on those pretty rockers and springs. Never seen anything like that before in an engine ?
 
You must log in or register to reply here.

Similar threads

V
new owner of a 620, will try to update this as we go.
2 3 4
Replies
61
Views
3K
valiant8086
V
P
mEL, need a little help !!
Replies
4
Views
457
Pa Dan
P
K
Need help with MF135 steering box?
Replies
2
Views
568
Jim.ME
J
D
desparate need of a steering arm for JD 302A
Replies
10
Views
504
JDEM
J
H
Super A with a Stuck Valve.
2
Replies
33
Views
2K
HVFDfirefighter
H
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top