Alan D Harmon
Member
need a used adjustable pipe on front sterling on 3010 brock off left side
- Thread starter Alan D Harmon
- Start date
Janicholson
Well-known Member
Tx Jim
Well-known Member
- Location
- Coyote Flats, Texas
Steering tube item 37 or 39?
https://partscatalog.deere.com/jdrc/sidebyside/equipment/57657/referrer/navigation/pgId/270758
Alan D Harmon
Member
in the part # is 51 thanks
Alan D Harmon
Member
it is the 4in pipe that is welded to the 2in that cares the spinal on left side
Alan D Harmon
Member
thanks for the info.
Jim.ME
Well-known Member
- Location
- central ME
That is more than an adjustable pipe, that is an ''Axle Knee'', part number for item key #51 is AR50962.
If you web search using ''John Deere AR50962'' you will get a number of hits, from new at JD for about $1000 to some new and used in the $175 price range. There are some new ones on eBay in the $175 range with free shipping.
The YT store should have them, and All States Ag Parts (YT's parent company) shows as having new and used available.
Make sure any new or used one you get has the bushings for the knuckle (spindle) in it or you will be chasing those. If you post your general location someone close to you might have one or be able to suggest a local, to you, place you could check.
This post was edited by Jim.ME on 12/09/2023 at 01:43 pm.
If you web search using ''John Deere AR50962'' you will get a number of hits, from new at JD for about $1000 to some new and used in the $175 price range. There are some new ones on eBay in the $175 range with free shipping.
The YT store should have them, and All States Ag Parts (YT's parent company) shows as having new and used available.
Make sure any new or used one you get has the bushings for the knuckle (spindle) in it or you will be chasing those. If you post your general location someone close to you might have one or be able to suggest a local, to you, place you could check.
This post was edited by Jim.ME on 12/09/2023 at 01:43 pm.
Alan D Harmon
Member
Thanks for all the information that is real help. I was painting my 3010 and the front fell of the
blocks, and brock it thanks again merry Christmas.
blocks, and brock it thanks again merry Christmas.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy