clutch

Alan D Harmon · Oct 11, 2023

Have a JD 3010 let the clutch 0ut it grabs and go.no starting out slow and easy.

Janicholson · Oct 11, 2023

A glazed driven disc will do that. A ceramic puck style disc is prone to do that. oil or grease on the disc will also do it. Jim

Roger in Iowa · Oct 11, 2023

Does his tractor have the inspection plate that can be removed and then maybe see what is going on? I.e. oil from main or trans?

JD Dave · Oct 11, 2023

For the perfect cure, I suggest that you replace the clutch disc, re-face the flywheel, repair, replace or adjust the pressure plate and replace the throwout and pilot bearings. You cannot do a clutch repair half_axxed or you will be disappointed. And who wants to do the job over? Used a genuine JD clutch disc because the so-called finger-type clutch discs can grab and ruin the flywheel and pressure plate surfaces.

rustred · Oct 11, 2023

You have oil on the disc. Same deal as when u have a leaking rear wheel seal on a truck that brake will grab and skid.

clutch

Alan D Harmon

Member

Janicholson

Well-known Member

Roger in Iowa

Well-known Member

JD Dave

Member

rustred

Well-known Member

Similar threads