IHC 430 435 Balers

Bobl1958 · Oct 1, 2023

Is there anyone here familiar enough with IHC balers to know if a 430 and 435 are basically the same baler? I have a 435 and have the chance to buy a nice 430 for parts. Both are wire. The 430 is a little ways away so I cant just check part for part very easy. Thanks for any insight you might have - Bob

Janicholson · Oct 1, 2023

I looked at the caseih.com (link)I put in 435 baler as the model and found the parts diagram for it. The same tactic works for the 430. It should be easy to compare part numbers and configuration. Jim
put in 345 baler and the diagrams will show. Same for 430

mschwartz · Oct 1, 2023

Very similar, never been around a wire version but twine versions were more or less the same. See more of the 435 with the better wide pickup header than I saw on on 430. Good luck, Mike

dairyman · Oct 2, 2023

Its the same machine with the exception of the 435 has a narrow space pickup and the 430 doesnt. Ive both models in twine tie.

Dave

IHC 430 435 Balers

Bobl1958

Well-known Member

Janicholson

Well-known Member

mschwartz

Member

dairyman

Member

Similar threads