Generator cut-out

Richard G. · Aug 20, 2023

Anybody making 6 volt generator cut-outs for tractors.
I mean the old style, not electronic.
Thanks, Richard in NW SC

Richard G. · Aug 20, 2023

I see this site has one for a 9N Ford.
Is it electronic?

JMOR · Aug 20, 2023

(quoted from post at 16:09:43 08/20/23) I see this site has one for a 9N Ford.
Is it electronic?

would expect that they would be bragging about it, if it were electronic.

Crazy Horse · Aug 20, 2023

A non-electric cut out?

buickanddeere · Aug 20, 2023

You can mount the diode
Cutout in a hidden location and just leave the ordinary mechanical regulator and mechanical cutout in place .

Mike(NEOhio) · Aug 20, 2023

Brillman

38 Sears Roebuck · Aug 20, 2023

Try these people. Chestnut Hill Auto Electric. 717-445-4516. They know their stuff.

Duner Wi · Aug 20, 2023

Look at this one from Brillman.#B8001-001, Universal Cutout Relay

They also list one as electronic so this one may not be.

redforlife · Aug 20, 2023

Not much to a cut out. Less to go wrong there than a voltage regulator. Are you sure yours is bad??

Not sure how deere's were wired up, but the old farmalls were controlled through the light switch. If Amp box lid (where light switch was at) was not properly grounded, charging system would not work. Common problem they had (bad ground there). If deere's had something similar, you might check for a bad ground. The last time I tore into a cut out problem, I thought I had a bad cut out also. Turned out to be bad grounding.

JMOR · Aug 21, 2023

(quoted from post at 17:15:31 08/20/23) A non-electric cut out?

PELLING!!! Electronic, not electric! :roll:

Richard G. · Aug 21, 2023

Exactly.

Gomer · Aug 21, 2023

Is there a difference in the regulator for an A circuit of B circuit generator.

JMOR · Aug 21, 2023

(quoted from post at 08:42:58 08/21/23) Is there a difference in the regulator for an A circuit of B circuit generator.

bsolutely different and NOT interchangeable.

John T · Aug 21, 2023

Is there a difference in the regulator for an A circuit of B circuit generator.

YES definitely, you need the correct one.....

John T

Generator cut-out

Richard G.

Well-known Member

Richard G.

Well-known Member

JMOR

Well-known Member

Crazy Horse

Well-known Member

buickanddeere

Well-known Member

Mike(NEOhio)

Well-known Member

38 Sears Roebuck

Member

Duner Wi

Well-known Member

redforlife

Well-known Member

JMOR

Well-known Member

Richard G.

Well-known Member

Gomer

Member

JMOR

Well-known Member

John T

Well-known Member

Similar threads