Update 16

jd2cyl1943 · Aug 2, 2023

This is what I did today. The other update was for yesterday.

JD Dave · Aug 2, 2023

Great pictures. That's a beautiful cat!

HFJ · Aug 2, 2023

(quoted from post at 20:46:35 08/02/23) Great pictures. That's a beautiful cat!

i agree. looks just like my older cat. i've been partial to that look since my first.

SweetFeet · Aug 2, 2023

Great pics... cool cat looks pretty
content to hangout and watch you work.

r.w.b. · Aug 3, 2023

id have to go to my friendly john deere dealer and buy a few rattle cans of john
deere classic green and paint all the area behind the flywheel and casting.
looking good. as for kitty we got 1 that looks like yours

Richard G. · Aug 3, 2023

I have spun JD flywheels like that a bunch and still do on my 41 H.

Mark-Ia · Aug 3, 2023

Replace the cork flywheel seal while you have the
flywheel off.

Gene Davis (Ga) · Aug 3, 2023

Looks as if you are very fortunate that the previous owner must have taken good care of the tractor. The splines in the flywheel the clutch drive disk and also the crankshaft have obviously been kept tight and they are not all messed up. Be sure that you keep a close check on them when you get it all going again.

Update 16

jd2cyl1943

Member

JD Dave

Member

HFJ

Well-known Member

SweetFeet

Well-known Member

r.w.b.

Well-known Member

Richard G.

Well-known Member

Mark-Ia

Well-known Member

Gene Davis (Ga)

Member

Similar threads