Ford 3000 highway

robinchatteris · May 31, 2022

Hello all, I have just bought my first tractor which is a ford 3000 highway CH213C, none of the electrics work other than starting. I have been looking for a wiring diagram to help me diagnose the problem if anyone has one they can help with

My plans are to use around my small holding and renovate when i get the chance

thanks all

robinchatteris · May 31, 2022

I have tried to upload a picture however the forum filters it, not sure how to do this?

This post was edited by robinchatteris on 05/31/2022 at 09:49 am.

Steve@Advance · May 31, 2022

It takes a few posts to allow pictures, to prevent spam.

You can make a few more posts or go to Site Comments below and get permission.

robinchatteris · May 31, 2022

(quoted from post at 10:09:32 05/31/22) It takes a few posts to allow pictures, to prevent spam.

You can make a few more posts or go to Site Comments below and get permission.

thanks for the advice

robinchatteris · Jul 27, 2023

im making good progress on the tractor and now addressing some of the other problems i hope you can help with?

1. the transmission handbrake does not work, pull it up and no engagement at all
2. trying to remove the steering wheel is proving impossible, ive tried soaking, bashing and a puller, but without doing some damage, i'm a little stuck on what to do next?

showcrop · Jul 27, 2023

Your brake shoes are likely worn out. If the pedals are not high you can adjust them. The adjusters should be behind holes in the backing plate near the bottom to the rear of the axle. Steering wheels can e very difficult. A new one is $37.30 on this site.

Hobo,NC · Jul 27, 2023

You should post this on the Ford board as their are a few other ways to pull the wheel. Its a great bunch that are of great help.

My way.

https://forums.yesterdaystractors.com/viewtopic.php?p=11047279&highlight=wheel#11047279

BTW if you are not going after the top seal in the steering box don't hammer, rock are pull hard by hand forcing he wheel off are that seal will leak.

robinchatteris · Jul 27, 2023

i think the handbrake i have is a mechanical version and not linked to the wheel brakes

Destroked 450 · Jul 27, 2023

CH213C is a later model than a 3000, possibly a 3600 or industrial version
Post the unit number and serial numbers for us to know what year model it is
The later models have a different wiring harness from a 3000 series

Ford 3000 highway

robinchatteris

New User

robinchatteris

New User

Steve@Advance

Well-known Member

robinchatteris

New User

robinchatteris

New User

showcrop

Well-known Member

Hobo,NC

Well-known Member

robinchatteris

New User

Destroked 450

Well-known Member

Similar threads