Update 13

jd2cyl1943 · May 3, 2023

I got the tractor jacked up to get the tires off. I'm bit behind schedule.....

Found some nice JD Green under old grease.

I gave the front end of the tractor a good washing.

I sprayed out the radiator fins to clean out the dust. They look pretty good. I'll be reusing the original 80yr radiator.

Janicholson · May 3, 2023

Before removing the tires, chain, or heavy ratchet strap the axle housings to that 4X4. The final drive housing is too narrow to balance well. The width of 4X4 and stand position is good. Jim

caterpillar guy · May 4, 2023

that 4x4 looke like a chicken fixing to me. But if it will hold one tire at a time it should be fine change the tires right on the machine. One tire will keep it balanced to the oppsite side while working. I would block under the axle housing if it was me.

Mike(NEOhio) · May 4, 2023

I did that with my H but put bolts through from the bottom. Don't take both wheels off like that.

Update 13

jd2cyl1943

Member

Janicholson

Well-known Member

caterpillar guy

Well-known Member

Mike(NEOhio)

Well-known Member

Similar threads