Olliejunkie
Well-known Member
Any thoughts on value, parts availability and if they're any good?
- Thread starter Olliejunkie
- Start date
Olliejunkie
Well-known Member
Well heck. I went and bought it so guess it don't matter what you think now.
Pete in MD
Well-known Member
- Location
- Central Maryland
Wow.
45 minutes after you asked for info you pulled the trigger and bought it. Was it an Ebay item or
similar auction item that was about to close?
45 minutes after you asked for info you pulled the trigger and bought it. Was it an Ebay item or
similar auction item that was about to close?
Olliejunkie
Well-known Member
It was on Facebook. I wanted a cub with a belly mower but this came up and I have a few tractors it will fit. Tomorrow is a good day to get it so we agreed on a price..
Olliejunkie
Well-known Member
I have a to30 or a 8n ford I will put it on. I would like a ih c someday.
caterpillar guy
Well-known Member
Only question I would have is can you get enough clearance to lift it off the ground under those low tractors like the N series fords and the similar fergies.
Pete in MD
Well-known Member
- Location
- Central Maryland
It's built for a 3-point hitch but what's the ball hitch on the front for?
Olliejunkie
Well-known Member
Ball hitch is on back probably so a person could still pull a trailer or something. I think mine was scabbed on.
Olliejunkie
Well-known Member
Well one looks like it will mow. The other is missing parts but was listed as a parts machine. Wouldn't take long to fix if I can find parts. I probably paid to much after doing some searching but so be it.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy