g ostby
Member
- Location
- 25023 Roosevelt Hts Dr E, Lincoln WA
Learning how to post a picture
- Thread starter g ostby
- Start date
Tim PloughNman Daley RIP
Well-known Member
You first need to get a 3rd party picture hosting site like IMGUR, save your camera photos there, then copy the image url and paste it in your YT post. You can't just try to copy and paste the image from your camera or phone as YT doesn't support have that much bandwidth. Instructions listed somewhere...
Tim Daley(MI)
Tim Daley(MI)
Steve in VA
Well-known Member
- Location
- Natural Bridge Virginia
I post all my pics directly from my phone/camera. As long as its w/in the stated size limit, it works.
Majorman
Well-known Member
- Location
- Scarning, Norfolk, England
Do you mean something like this?
My pictures load straight from my computer but you do have to watch the size.
My pictures load straight from my computer but you do have to watch the size.
johnofnewhaven
Well-known Member
I also post photos directly from my phone. Just select it and post it. Super easy
You just have to be within the size limits, and post directly here.
I just hate those third party hosting sites, they change accounts so often and the. The pictures all disappear. A site like this has been around a couple decades, but if you look up an old thread for info those hosted pictures are mostly all gone, lost now. Bligh.
To the original poster, you need to be here a little while and you need to make 5 to 10 messages before this site allows you to post a picture. This cuts down on the spam they have to deal with.
And yes, there are days the picture posting just doesnt work well. I guess we all have a bad day now and then!
Paul
I just hate those third party hosting sites, they change accounts so often and the. The pictures all disappear. A site like this has been around a couple decades, but if you look up an old thread for info those hosted pictures are mostly all gone, lost now. Bligh.
To the original poster, you need to be here a little while and you need to make 5 to 10 messages before this site allows you to post a picture. This cuts down on the spam they have to deal with.
And yes, there are days the picture posting just doesnt work well. I guess we all have a bad day now and then!
Paul
1948CaseVAI
Well-known Member
No. this is fake news and a 3rd party site is not required at all. When you post there is a window for advanced posting tools - drag your pic there directly from you laptop, tablet or phone. Also make sure you have enough posting history that you are allowed to post photos.
Rich'sToys
Well-known Member
- Location
- Southern MN
I posted this on a different thread a while back for someone who was also having trouble posting pictures. Hope it helps.
"If you're not on modern view, switch to it. Then scroll down below the box where you're typing your message. It will say "upload photos/videos", and below that will be a little box that says "Choose Files". Click that. It should take you to where the pictures are on your computer. Find the one you want and double click on it. It should show up beside the little box and say that it is uploading. Wait till it is finished-sometimes takes a couple minutes. It will tell you when it is done. then go back up and click "preview" and see if it is what you want. If it is, click "submit" and you're done!
There are some limits on how large the photo can be--I'm not sure what those are. You can ask down in "Site comments" if necessary. But just try it first. If it works, then no problem."
g ostby
Member
- Location
- 25023 Roosevelt Hts Dr E, Lincoln WA
Rich; I'll try it. Gary
g ostby
Member
- Location
- 25023 Roosevelt Hts Dr E, Lincoln WA
Thanks Rich, It works, Simple. Gary
g ostby
Member
- Location
- 25023 Roosevelt Hts Dr E, Lincoln WA
This is the plow I just bought. Gary
Rich'sToys
Well-known Member
- Location
- Southern MN
Glad I could help.
Nice looking tractor!
Nice looking tractor!
Ultradog MN
Well-known Member
- Location
- Twin Cities
That is the correct frame for a 3 cylinder 2000 and 3000.
However, that blade might? be the dozer blade and not the snow blade.
I have the snow plow setup on my 3000 and like it a lot.
However, that blade might? be the dozer blade and not the snow blade.
I have the snow plow setup on my 3000 and like it a lot.
g ostby
Member
- Location
- 25023 Roosevelt Hts Dr E, Lincoln WA
Ultradog; That's a good pic. Thanks. Here are 3 pics of what I bought. Hope it fits a 3000 gas. Gary
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy