CNH 2344 combine chaff spreader

crsutton81

Member
Since we are experiencing decent weather to work on projects that will not fit inside the shop, the combine has been undergoing it's
yearly checkup in preparation for 2023 crop year. Upon removing the elevator/seive drive clutch assy, the straw spreader drive pulley has a bad spot in it. I have a dealer parts book for it and it shows as part number 566516R92, with a diameter of 9.75 OD inches. My pulley measures 10 inches OD across the face. Was there a speed up kit offered for the spreaders or ??? Everything I find online with this number seems to be a one size fits all on these machines.
cvphoto144460.jpg
 
"across the face." Appears to be V-belt and given that, I'm relatively certain that the effective diameter is not going to be 'across the face'. "Worn out" will be able to tell you for certain.
 
(quoted from post at 00:07:40 01/08/23) I have a dealer parts book for it and it shows as part number 566516R92, with a diameter of 9.75 OD inches. My pulley measures 10 inches OD across the face.

The 9.75 spec is the diameter at the outside of the belt. The actual pulley OD is 9.94-10.1 inches depending on the supplier. 566516R92 is currently back ordered at CNH, if you give me a location I can point you to a dealer that has it in stock.

87735652 is the same pulley painted gray. List cost is more, but there are a couple in stock.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top