Topp-Stewart

Bill(Wis)

Well-known Member
These were quite popular locally for a while I'm told but then they quickly went out of business. Some said that as soon as considerable stock was sold, they folded. Took the money and ran. I don't know.


cvphoto141801.jpg


cvphoto141802.jpg


cvphoto141803.jpg


cvphoto141804.jpg
 
From CH Wendel: This 1920 Model B featured a Waukesha four cylinder 4-3/4 x 6-1/4 inch engine with 30 drawbar and 45 belt pulley hp. Weighing 7,500 pounds, it had a 1920 price of $3,250. Topp-Stewart later reorganized as Atlas Engineering Co of Clintonville Wi. D.S. Stewart was also involved with Antigo Tractor Co., another FWD tractor builder in Antigo Wi.
 
From CH Wendel: ..and about 1927 there was another change to Atlas Engineering Co. D.S. Stewart designed these four-wheel drive tractors.
 
From CH Wendel: From 1921 to 1923 Antigo built a new and unique tractor. Rated at 15 drawbar and 25 brake hp, it used a four cylinder 4 x 6 inch engine with force feed lubrication. The Brown-Lipe-Chaplin transmission was of the sliding gear style, and the final drive was accomplished through enclosed bevel gears. Known as the Quadpull, it weighed 4,500 pounds, and represented the ultimate in unit frame design.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top