Traditional Farmer
Well-known Member
- Location
- Virginia
Anyone know where to get a 1/2 inch threaded flex or love joy type coupler,need one for my neighbor's Briggs wood splitter motor.
- Thread starter Traditional Farmer
- Start date
Steve@Advance
Well-known Member
Probably have to buy a small bore and thread it, if you can get one without a keyway.
stevieb49829
Well-known Member
- Location
- Spirit Lake, Idaho
They are all over eBay. I got my last set from Shorenutz. But Steve's suggestion is good - you may have to buy one without a keyway and thread it yourself. Are they left-hand threads? That might be even harder. They come in various sizes, which relates to the power they are able to transfer. The L-070 and 075 are very common on small power applications. I see the L-090 a lot in farm stores, probably for driving hydraulic pumps. steve
Traditional Farmer
Well-known Member
- Location
- Virginia
Yea I can find plenty of couplers but not threaded.
stevieb49829
Well-known Member
- Location
- Spirit Lake, Idaho
TF: What size do you need, or what is the outside diameter?
Traditional Farmer
Well-known Member
- Location
- Virginia
The threaded one has 1/2 inch fine threads.I'll have to get the overall measurement.
Traditional Farmer
Well-known Member
- Location
- Virginia
The other half is 3/8 keyed,need the complete coupler assembly so what overall size won't matter.
stevieb49829
Well-known Member
- Location
- Spirit Lake, Idaho
So you're not trying to match half of an existing coupler, but need to create a new coupler between a 3/8 keyed shaft, and a 1/2 inch NF threaded shaft? Buy a 3/8 coupler, one side keyed, drill the other side out to 29/64ths. and tap to 1/2 NF. That would be a simple operation for a machine shop if you provide the part.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy