Super C Cultivators

Cmore · Aug 30, 2022

Does anyone know if the standard 2 row front mounted cultivators for a C or Super C

can be narrowed for 30 inch rows?

Fritz Maurer · Aug 30, 2022

Yes they can ( a C-254 anyway) but you have a lot under the tractor and you have to set your stops so nothing pokes the oil pan.

gene bender · Aug 30, 2022

why not just move the shanks and go

Cmore · Aug 30, 2022

I bet your right because Ive noticed the cultivators come close to the oil pan
even set on 38 rows.

Cmore · Aug 30, 2022

Can I do that? Cmore

Fritz Maurer · Aug 30, 2022

Another possibility is take a couple shanks off the front and put them on the rear gang, in the center, if you have enough toolbar, that is.

WESnIL · Aug 30, 2022

There is a separate tool bar for the rear. It will be different if for axle mount or fast hitch mount.

560Dennis · Aug 30, 2022

Watch your (I call tool bar) shanks clear the oil pan in up . You might put an impression into the oil pan . Two or more designs in c and sc angle in shank bars .
Whats the width of the tricycle ? Might want the mono wheel front ?
Or do you have a Wide front ? !
Might need more offset in the shanks !

Just some things to ponder , suggest to you

560Dennis · Aug 30, 2022

From my manual fro a C244 corn and cotton cultivators.

Cmore · Aug 30, 2022

I bet your right because Ive noticed the cultivators come close to the oil pan
even set on 38 rows.

Super C Cultivators

Cmore

Member

Fritz Maurer

Well-known Member

gene bender

Well-known Member

Cmore

Member

Cmore

Member

Fritz Maurer

Well-known Member

WESnIL

Member

560Dennis

Well-known Member

560Dennis

Well-known Member

Cmore

Member

Similar threads