(800) 853-2651
SHOP NOW

Hyd lift on a Ford 861

K

Ken Sikora

Member
After replacing the cam follower pin under the top cover, the arms did lift all the way. Then after some use it kept rising less. Now it wont lift at all. Fluid level is good.
 
(quoted from post at 09:05:31 07/19/22) After replacing the cam follower pin under the top cover, the arms did lift all the way. Then after some use it kept rising less. Now it wont lift at all. Fluid level is good.
Click to expand...
o one is going to reply,"on go replace blah blah blah", you need to do some investigation and detective work.. People can help guide you with each additional piece of information, but beyond that it is a pure guessing game.
 
(quoted from post at 11:41:49 07/19/22) Is there anything else I should be looking for ? Thank you!
Click to expand...
'm not sure I remember correctly, but "if" the touch control quadrant assy , held on by 4 bolts, has slotted holes, I would try sliding it both full forward and full aft and see what difference that make in lift operation. A starting point. I know earlier models did, but just not positive about yours.
 
(quoted from post at 08:05:31 07/19/22) After replacing the cam follower pin under the top cover, the arms did lift all the way. Then after some use it kept rising less. Now it wont lift at all. Fluid level is good.
Click to expand...

I would say that one of the adjustments in the hyd lift has become loose.
 
You must log in or register to reply here.

Similar threads

S
1955 to35 hydraulic lift problem
Replies
0
Views
109
Steve1076
S
B
60 MF-35 3 point lift problem.
Replies
1
Views
212
Butch58
B
M
Squeaky sound coming from lift cover.
Replies
4
Views
266
MarkWisconsin
M
K
Ford 800/900 Hydraulic Remote - Auxiliary Port
Replies
8
Views
718
KJMClark
K
M
Ford 6000 3-point wont raise?
Replies
2
Views
194
MattLF9
M
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top