2022.06.11 "Extra" Pic

kcm.MN · Jun 11, 2022

This post was edited by kcm.MN on 06/10/2022 at 10:10 pm.

Carlmac 369 · Jun 11, 2022

Those 35's were a good looking tractor.

The grille screws out of alignment with each other sticks out like a sore thumb.

Gene Davis (Ga.) · Jun 11, 2022

I think the term for aligning the screw slots is clocking them. Good way to keep the correct police happy.

Steve@Advance · Jun 11, 2022

I used to own an Elco cabin cruiser, made of wood, held with slot head screws.

Every screw head was clocked either vertical on the vertical surfaces, or lengthwise on the horizontal runs! Thousands of them!

Carlmac 369 · Jun 11, 2022

(quoted from post at 10:09:26 06/11/22) [b:76cd346015]I think the term for aligning the screw slots is clocking them.[/b:76cd346015] Good way to keep the correct police happy.

Yes it is. I drew a blank when I typed that post and aligning was what came to mind but knew it wasn't the exact term.

This post was edited by Carlmac 369 on 06/11/2022 at 06:52 am.

2022.06.11 "Extra" Pic

kcm.MN

Well-known Member

Carlmac 369

Member

Gene Davis (Ga.)

Well-known Member

Steve@Advance

Well-known Member

Carlmac 369

Member

Similar threads