Another funny

4520BW

Well-known Member

cvphoto125692.jpg
 
I have to agree with you. But the reason that all
started where I live is because when all that metric
showed up every other size could be used With a
standard socket except what seemed to be a 10mm

Everyone had a standard socket set and went out
and bought a 10 mm as that was the one we all
needed. With no GOOD place to put it that was
the one that never could be found.
I do believe that is Why it all started.
I know I use 10mm and 13 mm all the time. Most of
the rest are standard.
 
I go to a store that still has long hooks with tools hanging on them. 10mm,7/16,3/8,1/2 and 9/16 hooks are all empty.
Sockets and combination wrenches.
 
(quoted from post at 05:32:13 05/14/22) I have to agree with you. But the reason that all
started where I live is because when all that metric
showed up every other size could be used With a
standard socket except what seemed to be a 10mm

Everyone had a standard socket set and went out
and bought a 10 mm as that was the one we all
needed. With no GOOD place to put it that was
the one that never could be found.
I do believe that is Why it all started.
I know I use 10mm and 13 mm all the time. Most of
the rest are standard.
hank you for that explanation. I have never understood why the 10 mm is more unpopular with you non metric guys than other metric tools.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top