Replaced points and condenser. Same issue: it will fire for maybe 6-10 times then die, then carb accumulates gas in base. Pulled plug and visually watched spark against ground of block. Good strong spark. I think there is a primary and secondary jet, or passage in carb. I think primary jet is not drawing or clogged or something going on. Wish I could post a picture. Can I use compressed air in main passage? Pb blaster?
I also replaced fuel filter and line. There is plenty of gas to carburetor.
Ideas.
Andy
This post was edited by Adobejoe on 05/11/2022 at 07:48 pm.
I also replaced fuel filter and line. There is plenty of gas to carburetor.
Ideas.
Andy
This post was edited by Adobejoe on 05/11/2022 at 07:48 pm.