1965 JD 4020

miangus · Mar 15, 2022

I need to know the size of the bolts that hold the steering
arm to the steering post. Dont ask. Thanks

matthies · Mar 15, 2022

3/4 X 2 1/8

SVcummins · Mar 15, 2022

3.86 at John Deere do not use the wrong bolt

SVcummins · Mar 15, 2022

tim s · Mar 16, 2022

And not a thread longer than 2 1/8

miangus · Mar 16, 2022

Thanks guys. I knew there was a length limit just wanted to make sure. Thanks again.

SVcummins · Mar 16, 2022

Did someone do Like do put the bolts in safe space then forget where the place is ??

miangus · Mar 16, 2022

I wish, it has an after market front end and all but one fell out, just made it out of the cow lot. Operating on the frozen ground in the lot must have loosened them up. It doesn't appear that they broke off.

matthies · Mar 17, 2022

The aftermarket used shorter bolts. You might be in trouble.

BarnyardEngineering · Mar 17, 2022

If it used shorter bolts, there should be good threads deeper in the hole.

1965 JD 4020

miangus

Well-known Member

matthies

Well-known Member

SVcummins

Well-known Member

SVcummins

Well-known Member

tim s

Well-known Member

miangus

Well-known Member

SVcummins

Well-known Member

miangus

Well-known Member

matthies

Well-known Member

BarnyardEngineering

Well-known Member

Similar threads