turboterry1466
New User
Im looking for a ring and pinion ( 7/32 teeth count)for a JD 435 tractor
Thanks
Thanks
- Thread starter turboterry1466
- Start date
Janicholson
Well-known Member
Using the Classified ad area to the left in classic view is likely to get results. Jim
used red MN
Well-known Member
- Location
- Coon Rapids, MN
Hello Terry welcome to YT! As a general rule using the forums for Buy-Sell-Trade is a discouraged practice here. If you are using a phone you have to go to ..Options.. to get to the Classified.
I have a 435. I'M thinking it is 10% faster than a 430. Have you checked what a 440 industrial had. Most were Detroit's but some were gas. A 1010 will work but think it is slower. I was trying to slow mine down so second was in between stock 1st and 2nd. But I never did do it. Seems like I needed a ring and pinion from a 420 430 and final drive gears from a 1010. Think that would slow it down 25 %. And no I don't have a extra. But might know who does.
I have a 435. I'M thinking it is 10% faster than a 430. Have you checked what a 440 industrial had. Most were Detroit's but some were gas. A 1010 will work but think it is slower. I was trying to slow mine down so second was in between stock 1st and 2nd. But I never did do it. Seems like I needed a ring and pinion from a 420 430 and final drive gears from a 1010. Think that would slow it down 25 %. And no I don't have a extra. But might know who does.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy