Cable Operated Loader Valve

Kerwin · Dec 6, 2021

I'm in the process of putting a cab on an Oliver 1650 that will have a 1610 loader with a dedicated control valve. I've got room under the cab floor on the right side to
mount the valve and control remotely via cable and joystick. I'm wondering if anyone has a tractor with a cable-operated remote loader valve and could provide some
photos?

Looking for some examples from something with an aftermarket cab like I will be using (mine's a Hiniker) and not something set up from the factory. I've got a 2-spool
Gresen valve to use for the loader hydraulics. Thanks.

Janicholson · Dec 6, 2021

Muncie Gear works, and others have stout Push Pull cables and control levers to make them work. 5/16 threads on the ends is stout enough. Jim
Muncie

thehickdaddy · Dec 6, 2021

hope this helps a little

as far as i know, many hydraulic spool valves can be converted to cable operation.
or in the case of dump trucks at work, a nut is sometimes welded onto the standard spool valve lever, and the a clevis is threaded onto a remote cable and pinned thru the welded nut to make the connection
cable operated spool valve

thehickdaddy · Dec 6, 2021

or places actually sell kits with cables already attached to the hydraulics.

pretty sure i was told about some small IHI and Hitachi excavators having cables from the joysticks to spool valves under or beside the cab.

Cable Operated Loader Valve

Kerwin

Member

Janicholson

Well-known Member

thehickdaddy

Member

thehickdaddy

Member

Similar threads