Another funny

4520BW

Well-known Member
Well let's see if someone gets offend by this one!
cvphoto109730.jpg
 
Looks like S.O.P. to me.I used to work for a man that would go directly from option one to the last option,skipping the ones in the middle.
 
Just the other day I got up to like option 2 ? and then seen a note in the service manual about it being a left hand thread ! I don't know why the heads are not marked differently on the LH threaded ones ?
 
(quoted from post at 10:34:10 12/02/21) Well let's see if someone gets offend by this one!
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto109730.jpg>
eah, I'm offended....................................... by the current/recent use of the tiny pictures being posted! :evil:
KOpGvYO.jpg


This post was edited by JMOR on 12/02/2021 at 07:45 am.
 
I've got several of those old bent, beat, belled out, grease and blood stained, well worn pieces of pipe.

They all have their special memories attached!
 
I enjoy your funny and in no way complaining.....

Have you ever tried turning your phone 90 degrees and then posting the pic?

You likely have them saved vertically and it wont matter anyhow.

I enjoy them anyhow no worries.

Paul
 
I had to use a twelve foot cheater bar and a pipe wrench on the valve on my propane tank. I didn't think the flame wrench was a good idea!
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top