(800) 853-2651
SHOP NOW

IH2001 Loader Dump Cylinder

O

OldN-Ornery

New User
Hello - I recently purchased a '57 Massey Harris 444 with an IH2001 Loader and the single trunnion mounted dump cylinder is leaking around the ram quite a bit. I want to remove the cylinder to be able to take
it apart but I am not sure how to remove it. Its a trunnion mounted cylinder in the center of the loader. Does anyone have any idea or has worked on this loader?
 
(quoted from post at 12:37:28 11/30/21) Hello - I recently purchased a '57 Massey Harris 444 with an IH2001 Loader and the single trunnion mounted dump cylinder is leaking around the ram quite a bit. I want to remove the cylinder to be able to take
it apart but I am not sure how to remove it. Its a trunnion mounted cylinder in the center of the loader. Does anyone have any idea or has worked on this loader?
Click to expand...

From pictures on the web, it would appear you unbolt one or both trunnion mounts and slide them apart to free the cylinder. If someone has welded them in place, you will need to cut them (or at least one) free. Sometimes it works to leave the cylinder barrel mounted and pull the ram out to reseal it. You have to decide if you can do it that way.
 
You must log in or register to reply here.

Similar threads

D
Davis Loader 102-A
Replies
5
Views
284
DanaHaff
D
U
MF 200 Loader Dump Cylinder
Replies
3
Views
297
Used-to-be-iowa-dave
U
S
Wagner WF3 cylinder question
Replies
7
Views
350
Husker 50 8n
H
U
MF 200 Dump Cylinder Rebuild Update
Replies
5
Views
360
Harry in Ky
H
P
Help picking correct replacement loader cylinders
Replies
18
Views
614
dbNga
D
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top