leaking fluid - need a part identified

geoffer · Oct 1, 2021

Hi, when I fill the rear axle of my Ford 4600 with fluid it leaks badly from around the part I have circled in red. Can someone please tell me what the part is called and give me some idea how to replace the seal. Thanks!

shaun wallace · Oct 1, 2021

Remove all the hardware, drive big screwdriver at parting line. Pops out. When going back make shure inner part goes in groove in shaft. Avaible from this site on left side under tractor parts. Replace other side too.

wore out · Oct 1, 2021

It is a brake rod seal, Case New Holland part number 86576339.

I don't know for sure if it can be slid over the brake rod externally with no major disassembly needed, or not.

Hopefully, someone more knowledgeable on this specific tractor will replay, and I would suggest getting a Service Manual!
Parts lookup

used red MN · Oct 1, 2021

Hello geoffer welcome to YT! To clarify the part is number 19 in the linked parts diagram by wore out. It is also shown in its installed position under number 25 in the diagram. I will attach a link to the part offered by YT that Shaun mentioned.
YT Ford 4600 brake rod seal.

Destroked 450 · Oct 1, 2021

Welcome to the forum, looks like your question has been answered but any more questions about your 4600 would be better asked in the Ford section
There's some well knowledged Ford guys that only dwell in that section

caterpillar guy · Oct 3, 2021

Are those dry brakes or wet. If dry he has bigger problems than just that dust seal.

Destroked 450 · Oct 3, 2021

4000 and larger have wet disc brakes
They should have put them on the 2/3000 as well

leaking fluid - need a part identified

geoffer

New User

shaun wallace

Well-known Member

wore out

Well-known Member

used red MN

Well-known Member

Destroked 450

Well-known Member

caterpillar guy

Well-known Member

Destroked 450

Well-known Member

Similar threads