Rich'sToys
Well-known Member
- Location
- Southern MN
This winter I plan to clean up and paint an IH plow that was my Dad's I need to replace the rod on the lever which adjusts the height.
On my John Deere plow there are two 1/4 inch rods--one coming up from the bottom, the other coming down from the top. They are joined in the middle by the clips shown in the photo. My question is- are these clips still available, and if so, what are they called? I have not been to the hardware store yet, but when I do go, what what would I ask for? I searched McMaster-Carr web site and didn't find anything that looked like these.
On my John Deere plow there are two 1/4 inch rods--one coming up from the bottom, the other coming down from the top. They are joined in the middle by the clips shown in the photo. My question is- are these clips still available, and if so, what are they called? I have not been to the hardware store yet, but when I do go, what what would I ask for? I searched McMaster-Carr web site and didn't find anything that looked like these.