Sealed beam headlights

So I went through a bunch of my old headlights trying to come up with a matching set for my Oliver Super 77. To replace the old lens and bulb they would need to be 4.75 OD. I had some 4411 GE sealed beams but they are 4.25 OD. Just wondering if anyone has a number for a replacement sealed beam?
 
I have no idea if these will fit...
You could follow up on the internet and see what else is available by the same company........

Pics off YT

Bob..
cvphoto102211.jpg


cvphoto102212.jpg


cvphoto102213.jpg
 
(quoted from post at 21:46:29 09/24/21) So I went through a bunch of my old headlights trying to come up with a matching set for my Oliver Super 77. To replace the old lens and bulb they would need to be 4.75 OD. I had some 4411 GE sealed beams but they are 4.25 OD. Just wondering if anyone has a number for a replacement sealed beam?
aybe, try 4511
 
4511 is a 6 volt version of the 4411. Catalog dimensions show it 4.5" diameter vs 4.365 for the 4411. They will both fit in the common rubber housing tractor/utility light housings. I have seen where some have added bands of rubber or tape around the edge of the sealed beam to build them up to fit the original metal housings when used in place of the bulbs with reflectors in those housings.

This post was edited by Jim.ME on 09/25/2021 at 04:44 am.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top