(800) 853-2651
SHOP NOW

Case Marathon Day Pics

I don’t own a Case yet.
cvphoto76324.jpg
 
The VAC still has both headlamps on the platform! When I got mine, there was only one, non working one left. So I mounted LED's up at the back end of the engine, like the later version.
 
Must not have been a case dealer near us in Central Alabama. Only ever seen one for sale. It was a DI. Should have bought it. Hardly see any case tractors at shows.....
 
I pay for that with heavy clay and low wet ground. But no rocks is nice. I did find one last fall about the size of a potato, made sure to throw it in the ditch.
 
Tractor club member was downsizing. I helped him out.

cvphoto76436.jpg


cvphoto76444.jpg


2 to make 1 runner for plow days.

After I missed out on a nice 930 at a consignment auction, I stupidly bought the ugliest tractor ever.
Also nonrunning SC and S here but I can't find their pictures.



cvphoto76459.jpg
 
How about something old. Came across this on Craig's list locally. It's the only one anyone has seen that I can find. No one knew case even made or sold them. If anyone has seen one elsewhere I would love to hear about it.


cvphoto76462.jpg


cvphoto76463.jpg


cvphoto76464.jpg


cvphoto76467.jpg
 
My 6 V system was in such good condition, I kept it, with the addition of a few new wires. I found a little box which I hooked up for the lights which gets me 12 V
 

cvphoto76493.jpg

A 'high altitude' Case....
A Case cross motor at a local show
cvphoto76495.jpg

An old picture of my

cvphoto76496.jpg

Dad on a C Case he restored. He had one in his native Holland that was buried under a potato patch for several months so that it would not be confiscated by the retreating army in WW2. Cousins still have it...

Ben
 
The Case VAI my dad pulled out of a fence row in 2011.
It had at least five layers of paint on it so my dad painted it Oliver Green because that was one of the colors. I inherited it in 2015 and plan on repainting it Flambeau Red in the next year or so.

mvphoto69931.jpg
 
This may be the best comprehensive compilation of old school equipment still getting it done that I have seen on YT. High Five to all contributors. I really enjoy these and viewing how things are done in other parts of the country. Encourage more like it. Thanks.
 
Here is my SC ready to give hay rides at our church's chili cookoff held in our machine shed each fall.

cvphoto76530.jpg


And one of Pastor John on his SC on the WHO tractor ride when they came through our town (New Sharon, IA)

cvphoto76532.jpg


And one of Chuck Machinist on his 400 on the same tractor ride.

cvphoto76533.jpg
 
Here are some of the Case Tractors I have owned over the years. I usually buy one, fix it up and play with it for awhile, then sell it and look for the next one. Bob
cvphoto76537.jpg


cvphoto76538.jpg


cvphoto76539.jpg


cvphoto76540.jpg


cvphoto76541.jpg


cvphoto76542.jpg


cvphoto76544.jpg


cvphoto76545.jpg


cvphoto76549.jpg
 
Best I can do for the day, sorry.

<iframe width="560" height="315" src="https://www.youtube.com/embed/4bxhpWP940U" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

<iframe width="560" height="315" src="https://www.youtube.com/embed/gqN33RV2Ty4" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

<iframe width="560" height="315" src="https://www.youtube.com/embed/F_7prjcNblc" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

I do have a relatively detailed Case steam tractor for my train layout, but I'll be dipped if I can find it. Probably because I'm looking for it.

Mike
 
Almost forgot about this one. It's my F2 that my buddy (on the drawbar) & I fixed up. That combine turned out a pretty clean sample for having sat out. It was the perfect sized machine for the H, too. Ended up getting rid of it due to a cracked axle. Still kicking myself for that.
cvphoto76589.jpg


Mike
 
I have two cameras, one a pocket sized one I try to keep with me,, the other has a whole lot more zoom and quality, but it is too big and costly to carry when I am in equipment,, wish I could have the small ones do what it will,, thank you for all the kind words
cnt
 
I picked 3 stone boat loads off of 8 acres , the boat is 12' long 4' wide has 6" removable side rack. the smallest one was the size of a volley ball.
 
Good old straight pipe on that baby. Get another 3 HP out of it AND.....they can hear you 3 counties away. (;>))
 
Love you all for sharing. I have no case products now but have lots of great memories in my pre-teen years. Someone showed a beautiful LA which was the first real tractor Dad put me on to help him.
 
got to have a case cat!
cvphoto76767.jpg

what u lookin at?

cvphoto76773.jpg

im tying to sleep.
cvphoto76774.jpg

would you turn the lights out!
 
Goodness Jon, I couldn't do that, but you could stop by sometime and take a gander at all the "junk" sitting around here. :)
 
The picture is how they were sitting before I brought them home. Sure was a head-scratcher to load by yourself with no wheels on one of them. I have a 1000 for sale I took out of a shed a couple years ago if anyone is interested. Probably wouldn't take much to get it running. I have the reel as well (not pictured), and corn head.
cvphoto76793.jpg


cvphoto76794.jpg


cvphoto76795.jpg
 
Nice looking 1000 I have a really nice one, a parts one and the one I first ran alone in 1968, I was hoping to find a 800 just because they are some what rare but the ones I find are like yours I see they have the chopper running backwards on your 1000,, both belts have to have a twist in them
 
A Few more
cvphoto76811.jpg


cvphoto76812.jpg


cvphoto76813.jpg

VA and "LF" Case drill
cvphoto76814.jpg


cvphoto76815.jpg


cvphoto76816.jpg


cvphoto76817.jpg


cvphoto76818.jpg

using the VA and 195 to pull apart my round balers cylinders

cvphoto76819.jpg


cvphoto76820.jpg


cvphoto76821.jpg

A Threshing display I put on for our local museum in 2018

cvphoto76822.jpg


cvphoto76823.jpg


cvphoto76824.jpg


cvphoto76825.jpg


cvphoto76826.jpg


cvphoto76827.jpg


cvphoto76828.jpg

the above shots show my watering setup I sue to keep the Moos happy,, the last shots are after we had a 90 mph wind come through and picked up the empty tank and what was left after it being blown over three fences and 1 1/2 miles, thankfully it went in a low spot about 500 feet before getting to a 4 lane 65 mph road or things could have been a whole lot worse
 
Check this out CASE GUYS!!!!!
The calendar,,sent to me years ago by you CASE guys!!!

Who is that,plowing snow with the swiss army knife CASE?

Its our good freind Loren!!!!
<img
cvphoto76890.jpg
 

cvphoto76841.jpg


cvphoto76842.jpg


cvphoto76843.jpg

I have a Case rear mount row-crop cultivator but its still in MN,, I have used my CASE tool bar for corn and sunflowers for what little I have raised to play with and Jon I have a nice cab to keep the Sun off lol

cvphoto76844.jpg


cvphoto76845.jpg


cvphoto76846.jpg


cvphoto76847.jpg


cvphoto76848.jpg


cvphoto76849.jpg


cvphoto76850.jpg


cvphoto76851.jpg


cvphoto76852.jpg


cvphoto76853.jpg


cvphoto76854.jpg


cvphoto76855.jpg


cvphoto76856.jpg


cvphoto76857.jpg


cvphoto76858.jpg


cvphoto76859.jpg


cvphoto76860.jpg


cvphoto76861.jpg


cvphoto76862.jpg


cvphoto76863.jpg


cvphoto76864.jpg


cvphoto76865.jpg


cvphoto76866.jpg


cvphoto76867.jpg


cvphoto76868.jpg


cvphoto76869.jpg


cvphoto76870.jpg


cvphoto76871.jpg


cvphoto76872.jpg


cvphoto76873.jpg


cvphoto76874.jpg


cvphoto76875.jpg


cvphoto76876.jpg


cvphoto76877.jpg


cvphoto76878.jpg


cvphoto76879.jpg


cvphoto76880.jpg


cvphoto76881.jpg


cvphoto76882.jpg


cvphoto76883.jpg


cvphoto76884.jpg


cvphoto76885.jpg


cvphoto76886.jpg


cvphoto76887.jpg


cvphoto76888.jpg
 
Thats Loren's 440 with snow plow,, Good to see you still have the calendar,, I still have a couple left for 2021 if you would like another, I see you kept the dealer transfer I sent also Nice!!
 
To all you CASE guys,,and to my freind Loren,,,,thank you all for sending me this calendar years ago,,and Thank you Loren,,for all the phone calls,,and encouragement you have given me over the years!!!Get well soon!!!!!

cvphoto76919.jpg


And//one more picture of the CASE KING


cvphoto76920.jpg
 
I have it for sure!!thanks again,,
Do you have a big picture you could post of the Black and gold CASE,,from Stanley farms?It is spectacular,,post it up top on a seperate post if you can find a picture,,,,thanks!!!
cvphoto76921.jpg
 
That Black Knight there is owned by Don Livingston in MN,, how about a couple of them Brand New sitting at the locking dock area in Racine circa 1971
cvphoto76937.jpg


cvphoto76938.jpg

My Dad snapped these and a few others when he was at a dealer meeting
 
(quoted from post at 05:14:32 02/12/21) Not mine, but for sale nearby
&lt;img src="https://www.yesterdaystractors.com/cvphotos/cvphoto76347.jpg"&gt;
Click to expand...
does this happen to be owned by an Amish man near Jewett Ohio? I think township road 262 sounds familiar. I was building a gas pipeline near his farm and remember those front wheels with coil springs.
 
You must log in or register to reply here.

Similar threads

P
pedal tractor plans needed
Replies
1
Views
205
RBnWA
R
P
Polarizing generator on Case 630
Replies
4
Views
178
mEl
mEl
F
case nutty
Replies
3
Views
420
RJKeith
R
C
case 310 crawler / 310e dozer paint help from old iron r
Replies
7
Views
555
case310
C
T
the wrong color
Replies
11
Views
369
tomturkey
T
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top