(800) 853-2651
SHOP NOW

1105 massey

C

Cannonplay

New User
The lift arms only work when I turn the steering wheel and they fall unless I continue to cut the wheels hard. The lift is strong

Also the remote doesnt work. Ive replaced thr charge pump.

Weve also had the hydronic pump ( that sits behind the radiator )
Tested and Im told its not the problem.

Does anyone know from experience what the problem is?
 
I don't know if it's related or not, but I had a 1020 Deere that did that exact same thing with the loader. It only worked with the
steering wheel turned all the way right to the stop. One of the spools in the power steering was blown.
 
There is a priority valve on the front of the firewall. Hooks the
the steel line from the pump. I would start there.
 
(quoted from post at 05:14:44 09/12/21) The lift arms only work when I turn the steering wheel and they fall unless I continue to cut the wheels hard. The lift is strong

Also the remote doesnt work. Ive replaced thr charge pump.

Weve also had the hydronic pump ( that sits behind the radiator )
Tested and Im told its not the problem.

Does anyone know from experience what the problem is?
Click to expand...
 
You must log in or register to reply here.

Similar threads

K
Ford 800/900 Hydraulic Remote - Auxiliary Port
Replies
8
Views
615
KJMClark
K
J
Advice needed on adding hydraulic remote for quick attach on industrial loader tractor
Replies
10
Views
591
jacks
J
S
Massey 150 3 pt problem
Replies
2
Views
266
Spencer2598
S
P
275 lift arm and remote valve controls?
Replies
1
Views
140
bentrims
B
J
Lift issues....
Replies
11
Views
583
joshbruce128
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top