What JD is this

grandpa Love · Sep 9, 2021

Can y'all tell from pictures?

TractorTucker · Sep 9, 2021

Looks like an M.

formerly ny bill · Sep 9, 2021

H. M was wide front.

DeltaRed · Sep 9, 2021

Rich'sToys · Sep 9, 2021

I agree with DeltaRed. It's an MT.

formerly ny bill · Sep 9, 2021

delta, you and tucker are right. forgot about the variations of an M/ MT/ MC/MI.

Tx Jim · Sep 10, 2021

I think I see a 3 pt hitch in 3rd photo which would make it a model 40T

This post was edited by Tx Jim on 09/10/2021 at 06:24 am.

Nat · Sep 10, 2021

MT, 40T,420T and 430T used the same platform . MT never had a 3 point hitch

Bob N.Y. · Sep 10, 2021

The H had a horizontal engine.

Mark-Ia · Sep 10, 2021

MT, you can see the serial # tag on the dash.

George by Geneva, NY · Sep 10, 2021

MT for sure. Look at gauge location. 40 has them on a separate panel not vertical in the cast steering support. ID tag is on same support, under gauges. 40 has black face gauges not white. Also, just aft of clutch area on torque tube is cast different. Yup it is model MT, that has 3pt arms added.

James Howell · Sep 10, 2021

Either a Model 40T or 420T.

<iframe width=560 height=315 src=https://www.youtube.com/embed/ufkD9Do7Gf8 title=YouTube video player frameborder=0 allow=accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture allowfullscreen></iframe>

J.Wondergem · Sep 10, 2021

I vote for a MT.

grayrider · Sep 10, 2021

Ive seen an MT with a three point hitch, as a matter of fact I know where one is about 10 miles from me

Tx Jim · Sep 10, 2021

(quoted from post at 09:43:53 09/10/21) Ive seen an MT with a three point hitch, as a matter of fact I know where one is about 10 miles from me

True 3pt or converted from original hitch?

James Howell · Sep 10, 2021

I was wrong.

The tractor is an MT.

Take a look at the dash.

Take a look at the dash on [b:654c4848f0]Sam[/b:654c4848f0] our 51MT

Note the letters [b:654c4848f0]MT[/b:654c4848f0] below the ignition switch.

Take a look at the dash on [b:654c4848f0]BW[/b:654c4848f0]our 40T.

As the late Pat Browning would say [b:654c4848f0][i:654c4848f0]<a href=https://duckduckgo.com/?q=eating+crow&t=newext&atb=v270-1&ia=web>Crow is best eaten</a> while it is still warm.[/i:654c4848f0][/b:654c4848f0].

M-MAN · Sep 10, 2021

But what is the back half? I don't recognize it.

M-MAN · Sep 10, 2021

I've seen several different types of
three point hitch conversions so that
isn't a factor. While I admit crs and
it's been a long while since I saw an MT
the rear doesn't look familiar. Where's
the final drives?

grayrider · Sep 10, 2021

James , your 40T dash looks like the one on my 420W

grayrider · Sep 10, 2021

And here is dash on my 40T

James Howell · Sep 10, 2021

[b:654c4848f0][i:654c4848f0]But what is the back half? I don't recognize it.[/i:654c4848f0][/b:654c4848f0]

Take a look at the diagram below.

Take a look at the drawbar assembly on [b:654c4848f0]BW[/b:654c4848f0] our Model 40T.

Pure speculation on my part, but looks like a 40T drawbar installed on an MT.

That is why I guessed wrong to begin with.

What JD is this

Well-known Member

Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Member

Well-known Member

Well-known Member

Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Similar threads