8n swinging draw bar

TeamNagg · Jul 13, 2021

I have a 48 8n Im looking for a swinging draw bar. The pro Im having is my clevis pin is 1 1/8 inches in diameter while all replacement bars Im seeing have an .95 inch hole on the tractor side. Does anybody know where I can find one or have one to sell that will fit my tractor. Thanks

big jt · Jul 13, 2021

Just use a 7/8 inch hitch pin. Either that or drill out the hole.

jt

Andy Wickiser · Jul 13, 2021

The drawbar kits come with a bolt-on
clevis assembly w/pin that matches.
YT 8N drawbar kit

Dean · Jul 13, 2021

Commercially available swinging drawbars must be used with the compatible drawbar bracket that attaches to the rear axle housing with 4 bolts near the PTO shaft.

The somewhat rare OEM swinging drawbar attaches to the tractor housing at the OEM bracket beneath the rear axle housing and is used in conjunction with the three point mounted 11 hole drawbar. Currently
available replacement drawbars cannot be used in this way.

Dean

DeltaRed · Jul 13, 2021

I have the swinging drowbar kit on my
8N.Works well.YT sells em.

8n swinging draw bar

TeamNagg

New User

big jt

Well-known Member

Andy Wickiser

Member

Dean

Well-known Member

DeltaRed

Well-known Member

Similar threads