Crookedcreekjerseys
Member
Im narrowing the wheels on my 5610 but one side wont go in, any ideas how to free it up?
- Thread starter Crookedcreekjerseys
- Start date
miner09
Well-known Member
- Location
- Pattonville Texas
Check bolt on Radis rod end on axle. It may be rusted or to tight to move when you go in with axle.
Crookedcreekjerseys
Member
Are you meaning the tie rod?
DMartin9N-2N
Member
Good morning, Crookedcreekjersey: I don't have your model tractor, but many have radius rods (or arms), to stabilize the front axle, they connect to the axle near the king pin, the rear of the radius connects to a bracket on side of transmission or nearby. On many tractors, you can unbolt the pivot at the rear (transmission end) of the radius rod, then see if you can move the radius easily or if it is stuck where it bolts to the axle.
Dennis M. in W. Tenn.
Dennis M. in W. Tenn.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy