uf70721 position control for 3 point hitch

r.bush@windstream.net · May 29, 2021

Does anyone know where I can get mounting instructions for a uf 70721 position control for three point hitch for an old tractor?

wore out · May 29, 2021

https://drive.google.com/file/d/1HVIHMdKAt78SyFUJh_2TPtCimbTqA9-O/view

https://forums.yesterdaystractors.com/viewtopic.php?t=1425684

.

used red MN · May 29, 2021

Wore out, tell someone who is not in the know about those
little grey tractors how that number led you to this reply.
Sorry, I know about a couple shades of red and a little
about some green, just never been around the grey, except
the later descendants that are in part a shade of red. My first
thought was that must be a Deutz, they use those silly 5
digit model numbers.

wore out · May 30, 2021

(quoted from post at 19:12:31 05/29/21) Wore out, tell someone who is not in the know about those
little grey tractors how that number led you to this reply.
Sorry, I know about a couple shades of red and a little
about some green, just never been around the grey, except
the later descendants that are in part a shade of red. My first
thought was that must be a Deutz, they use those silly 5
digit model numbers.

"uf 70721" is the part number given to the position control kit by it's manufacturer.

There target market is 9N and 2N Fords and their Fergie half brothers.

They had 3-point hitches but no "position control".

This kit adds that functionality.

used red MN · May 30, 2021

I see, thanks!

uf70721 position control for 3 point hitch

[email protected]

New User

wore out

Well-known Member

used red MN

Well-known Member

wore out

Well-known Member

used red MN

Well-known Member

Similar threads