Kubota loader

ford1956tractor · Apr 16, 2021

Has LA 1153 loader joy stick is stiff and will not return to normal position when tilting bucket?
Up and down work fine.
Any ideas?

Philip d · Apr 16, 2021

Does it have 2 cables going into the valve block? If so is one of them loose?

Stephen Newell · Apr 16, 2021

It's just a rod with grooves in it and maybe seals on the ends. Take it out and polish it and put it back in. It may have dirt or a little rust in it. Not long ago I rebuilt the control block on my Kubota 1630 loader and it was really simple. It was a little stiff, it had some rust on the rods. Tractor is 34 years old and has spent most of it's life outdoors.

ttown chuck · Apr 16, 2021

had a similar situation on a la 481 loader but mine was the up and down sticking ,there are 2 cups one for up and down 1 for curl i found a little cup on the bottom of the valve body was full of crud , i cleaned it out and put a couple squirts of oil on the spring ,my problem was solved

Tx Jim · Apr 17, 2021

I think JS operating cable is causing the problem.

ford1956tractor · Apr 17, 2021

I lubed the cables and it works like a charm--thanks to all for the responses

Kubota loader

ford1956tractor

Member

Philip d

Well-known Member

Stephen Newell

Well-known Member

ttown chuck

Member

Tx Jim

Well-known Member

ford1956tractor

Member

Similar threads