Two-way plowing plctures

DeltaRed

Well-known Member
1456 and International 642 rollover plow
cvphoto80485.jpg


cvphoto80486.jpg


cvphoto80487.jpg
 
Those bottoms sure look different upside down! My first impression (as seen upside down) was that there was a disc as the first shear.
 
I had a 1256 for a while. Was a good enough tractor just not what I thought it would be. Bought a bigger 1370 case which fit my equipment better. That 1256 had new paint and sure was pretty.
 
Yes it is an 806 Grill. The tractor had no Grill when it was purchased. I had a junk 806 out back with a good Grill. Just lifted it off and set it on to the 14. Fits Perfect .
 
(quoted from post at 22:06:39 03/05/21) Yes it is an 806 Grill. The tractor had no Grill when it was purchased. I had a junk 806 out back with a good Grill. Just lifted it off and set it on to the 14. Fits Perfect .

I was wondering about that too. Looks like it belongs on there!
 
Hard to beat the 642 and 314 ihc plows growing up we had two ih semi mount 550 plows I really liked them but to hard to haul
cvphoto80526.png


cvphoto80527.png


cvphoto80528.png


cvphoto80529.png
 
We always pre disc before we plow. Just getting levels the bads and helps chop up the trash. Does a lot better job of plowing
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top